Whale HeatAir Underfloor Gas & Electric Heater | 5kW or 6kW
- Heat output5kW (5GTE) or 6kW (6GTE)
- Size175 × 165 × 559mm (H × W × L)
- Free UK delivery on this order
- Not sure it fits?Send us your vehicle and layout and we'll check before you order. Ask us
Delivery
£10 UK delivery on orders under £250, and free on orders of £250 or more. Delivery details
Returns
Changed your mind or ordered the wrong size? Contact us before sending anything back and we'll tell you what to do. How returns work
Fitting
Check the cut-out size, wall or roof thickness and power supply in the specification against your vehicle before you order. Gas appliances must be fitted by a qualified gas engineer, and anything wired into 230V mains should be signed off by a qualified electrician.
Free power calculator
Will it run on your van’s power?
Add it to the free calculator. It sizes the battery, solar and charging for this and everything else you’ll run, then builds your kit.
Overview
Whale HeatAir Underfloor Gas & Electric Heater
Blown-air heating that fits under the floor, so it takes no cupboard, bed box or wardrobe space inside the van. The HeatAir burns LPG on its own, and on hook-up its electric element adds up to 3kW, either instead of gas or alongside it.
- Two outputs: 5kW (HeatAir 5GTE) or 6kW (HeatAir 6GTE), the same size and weight
- Gas, electric or both: run on LPG off-grid, on the element when you're paying for hook-up, or both for the fastest warm-up
- Three gas settings: 109, 233 or 342g/h on the 5kW; 131, 342 or 436g/h on the 6kW
- Underfloor mounting with a Z-bracket and isolation mounts, and the flue and combustion air intake below the floor
- Control panel included, connected by the supplied LIN cable
Powering it
On gas the heater only needs 12V for its fan and electronics. Whale quote as little as 0.6A on the low setting, which is roughly 5Ah over an eight-hour night: a small share of a 100Ah lithium battery. Higher settings draw more while the fan works harder. The electric element runs from your 230V hook-up rather than the battery. Plan your battery and charging in the Roam Wired calculator, or see our power stations.
What's in the kit
The heater, control panel and LIN cable; combustion air intake flue with silencer, clamp and 60mm bracket; exhaust flue with clamp, three brackets (40, 60 and 80mm) and a 100mm end-terminal bracket; the Z mounting bracket, isolation mounts and bracket screws; and Whale's installation and operating literature. Warm-air ducting and outlets aren't in MQL's kit list, so plan to buy those for your layout.
Fitting
The unit measures 175 × 165 × 559mm and weighs 8.7kg. It connects to your LPG supply, so have it fitted and commissioned by a qualified LPG installer. Not sure whether 5kW or 6kW suits your vehicle? Ask us.
The manufacturer's figures
Taken from the manufacturer's published specification for this model. Measure your vehicle before ordering, and have anything wired into 230V mains signed off by a qualified electrician.
Build notes for this part
Get the sizing and fitting notes.
Useful product advice, installation considerations and occasional offers for this part of your van build.