Solar Technology 290W MHD Flexible Solar Panel

Solar Technology 290W MHD Flexible Solar Panel | 2mm

With inline fuse (STPVFU290)
£739.00
Skip to product information
Solar Technology 290W MHD Flexible Solar Panel

Solar Technology 290W MHD Flexible Solar Panel | 2mm

£739.00
Taxes included. Shipping calculated at checkout.
  • Size1710 × 890 × 2mm
Version
  • Free UK delivery on this order
  • Not sure it fits?Send us your vehicle and layout and we'll check before you order. Ask us
Delivery

£10 UK delivery on orders under £250, and free on orders of £250 or more. Delivery details

Returns

Changed your mind or ordered the wrong size? Contact us before sending anything back and we'll tell you what to do. How returns work

Fitting

Check the cut-out size, wall or roof thickness and power supply in the specification against your vehicle before you order. Gas appliances must be fitted by a qualified gas engineer, and anything wired into 230V mains should be signed off by a qualified electrician.

Free power calculator

Is this the right size for your van?

Tell the free calculator what you’ll run and how long you’re away. It works out the power you need and builds your kit.

Overview

Solar Technology 290W MHD Flexible Solar Panel

290 watts from a panel just 2mm thick, for van roofs where a rigid frame won't fit or would add too much height. The mono high density (MHD) cells sit in a lightweight laminate that follows flat surfaces and gentle curves.

  • 290W rated output, 24.4V at 11.89A
  • 2mm thick and 1710 × 890mm, weighing 4.6–5.2kg depending on version
  • Salt-spray and UV tested
  • Up to about 1,740Wh a day on Solar Technology's estimate for good conditions

Which version?

The STPVFU290 uses shingled monocrystalline cells under an ETFE top sheet and comes with an inline fuse, two 0.9m leads and two 3m cables with MC4 connectors, so several panels can be joined into an array. The STPVFU290R has its cable exiting from the rear, a built-in diode against battery discharge, and weighs 4.6kg.

Charging a 12V system

This is a 24V-class panel (24.4V at maximum power). Solar Technology specify a 20A charge controller, which isn't included. On a 12V battery bank, choose an MPPT controller: it converts the panel's higher voltage into extra charging current, where a basic PWM controller would waste much of it. Real-world output depends on season, weather and roof angle; model your summer and winter days in the Roam Wired calculator. The panel also pairs with a power station that has a suitable solar input.

Specification

The manufacturer's figures

Taken from the manufacturer's published specification for this model. Measure your vehicle before ordering, and have anything wired into 230V mains signed off by a qualified electrician.

Rated power 290W
Vmp / Imp 24.4V / 11.89A
Voc / Isc 28.8V / 12.6A
Size 1710 × 890 × 2mm
Weight 5.2kg (fuse version), 4.6kg (rear exit)
Daily yield Up to about 1,740Wh (Solar Technology's estimate)
Charge controller 20A rating needed (not included)

Build notes for this part

Get the sizing and fitting notes.

Useful product advice, installation considerations and occasional offers for this part of your van build.

You might also consider