Skip to product information
2000W 12V Pure Sine Wave Inverter Charger w/ LCD

2000W 12V Pure Sine Wave Inverter Charger w/ LCD

Sold by Renogy UK

From £309.99

Renogy UK's price when we last checked, on 2 September 2026. They run promotions and price by variant, so confirm the current price on their page before you buy.

Buy at Renogy UK (opens Renogy UK in a new tab)

This is an affiliate link. Renogy UK takes your order, payment and delivery — Roam Wired is not the seller. If you buy through it we may earn a commission, at no extra cost to you. How we make money

How buying this works

Roam Wired does not stock this item. The button above hands you over to the seller's own shop, where you place the order, pay and arrange delivery directly with them. Nothing is added to a Roam Wired basket, and we never see your payment details.

We list it because it is the part our calculator would specify for a build like yours, not because we make the most on it. How we make money

Delivery and returns

Delivery cost, delivery time and the returns window are set by the seller, not by us, and Roam Wired's own £10 / free-over-£250 UK delivery does not apply here. Check their delivery and returns terms on their product page before you order.

Your consumer rights, including the 14-day right to cancel a distance sale, are against the seller who took your order.

Warranty and support

The manufacturer's warranty is handled by the seller you buy from. If something fails, raise it with them and quote their order number — we cannot open a claim on your behalf.

Happy to help you work out whether a part is right for your build: get in touch, or run the numbers through the free electrical calculator.

Free power calculator

Is this the right size for your van?

Tell the free calculator what you’ll run and how long you’re away. It works out the power you need and builds your kit.

Overview

2000W 12V Pure Sine Wave Inverter Charger w/ LCD

2,000W low-frequency inverter charger with a 30A transfer relay and a 65A charger. Heavy — 23.2kg — and that is the point: a low-frequency transformer rides out hard-starting loads that make high-frequency units stumble.

  • 2,000W rated, 6,000W surge
  • 230V AC, selectable 200–240V in 10V steps
  • 5–65A charger, configurable in 5A intervals
  • 30A transfer relay, around 10ms transfer
  • Gel, AGM, SLA, flooded, calcium, lithium and user profiles
  • 23.2kg, 510 × 285 × 193mm, LCD

Why 6,000W of surge from a 2,000W unit matters

Three times rated power on surge is a low-frequency characteristic. Anything with a motor — a compressor fridge starting, a circular saw, a pressure washer — draws several times its running current for a fraction of a second. A high-frequency inverter of the same rating may trip on that inrush where this one will not notice it.

The 30A transfer relay is the other advantage

A 30A relay passes essentially any UK hookup straight through to the van's sockets. The compact high-frequency units in this range use an 8A transfer switch, which caps pass-through at roughly 1.8kW — fine until you are on hookup trying to run a heater and a kettle. If you spend a lot of time on sites, this matters.

Before you order

23.2kg needs a proper mounting position low in the vehicle, bolted to structure, and it eats payload. No-load draw is under 20W normal or under 15W in power-saving mode. Operating range 0°C to 40°C. Have the 230V side certified by a qualified electrician.

Specification

Renogy's published figures

Taken from Renogy's own specification for this product, on the date shown by the price. Anything wired into 230V mains should be signed off by a qualified electrician.

Rated output 2,000W
Surge power 6,000W
Output voltage 230V AC, selectable 200 to 240V in 10V steps
Output frequency 50Hz
Waveform Pure sine wave
Input voltage range 10 to 16V DC
Charger output 5 to 65A, configurable in 5A steps
Transfer time Around 10ms
Transfer relay 30A
Peak efficiency 90%
No-load consumption Under 20W normal, under 15W power saving
Battery types Gel, AGM, SLA, flooded, calcium, lithium, user
Operating temperature 0°C to 40°C
Dimensions 510 × 285 × 193mm
Weight 23.2kg

Build notes for this part

Get the sizing and fitting notes.

Useful product advice, installation considerations and occasional offers for this part of your van build.

Others in this part of the build